How to Set Up an Indoor Growing Tent

4 Simple Steps to install your grow room

Hey there, hope all is good 🙂 In today’s article we’re going to go over some quick steps to show you how to set up your indoor growing tent!
There’s a couple tricky parts that you wouldn’t really anticipate, which is actually why we’re writing this piece.

Indoor Growing Tent Set Up Guide – Table of content

Indoor Growing Tent Kit
Step by Step Set Up

Indoor Growing Tent Kit

When you open your tent kit you should have the following :

8×2 attachable aluminum tubes
8 aluminum tubes that will be used for the horizontal section
8 corners
1 Tent

How to set up your Indoor Growing Tent

So let’s get into why you’re here for, easy steps to set up your indoor growing tent easily 🙂

Step 1 – Making the Bottom Frames

So the first thing you’re going to want to do is connect 4 of the 8 aluminium tubes that will compose the bottom frames.
You can identify them since they’re the only ones that have identical endings on both sides.

In order to make the base, place these aluminium tubes within the plastics corners that are provided.

Estimated time needed: 5 Minutes

Step 2 – Place the Base Into the Tent

Once your top and bottom sections are done, you’ll want to get one of them into the tent to form the base.

This is a pretty simple step, all you need to do in open the tent and place the aluminium square in there.

Once the base is in place you can start to place the vertical tubes, but don’t install them all yet!
Just install the ones in the back on the tent in the following way:

Back left : Place both vertical tubes
Back right: Place only 1 of the 2 tubes

Step 3 – Placing First Aluminium Bars in the tent

Place the plastic corner on top of the tube and and bring the tent over the corner. Repeat this with the back right corner

Once these 2 vertical tubes are installed, make sur the tent is over them and place a base tube between them in order make the connection.

Step 4 – Placing the Final Aluminium Bars in Top Frame

Now that the back section is in place we’re going to work our way forward.
You can start on either side and all you need to do is repeat the instructions of the previous, just make sure you connect the sides before the entrance bar (full disclosure, we haven’t fully place that last top bar)

Setting up the final Top bars in the tent

Set Up finish and Tent ready for the Lights & Air Set Up

There you go! All you need to do is add the final bar at the top, this bar will allow you to hang your lights among other things.

Now that your tent is ready you need to get the lighting and air ventilation system and you’re good to go! 🙂

tent fully built and ready for lights and air

How to Set Up your Lights (example with a CoolTube)

Before we leave you, here’s an example of what the room looks like with the lighting and ventilation systems and all 🙂
Only thing missing are little ones growing in there ^^

Alright folks that all for this one! Hope it helped you out, and as always don’t hesitate to send us a message is you have remaining questions! 🙂
We will answer you directly and/or update the content for others